Product Description

 Small spring loaded pivot hinge

  Furniture Acceories

• Small spring loaded pivot hinge for inset doors
• This small spring loaded hinge is made of two parts; a spring loaded pin housing and a plastic bushing (pin receiver)
• Both hinge parts install by drilling a hole and press fitting them in place
• The spring loaded pin housing measures 18.5 mm long by 9.5 mm diameter. The pin diameter is 5,6,7mm; 
• The plastic bushing is 10 mm in outside diameter
• Maximum door opening is approximately 140 degrees
• This hinge will work on door thicknesses ranging from 1/2″ to 13/16″
• This hinge is made of plastic with a steel pin and spring.
• PLEASE NOTE: This hinge is not a “self-closing” hinge. The spring is in the pin receiver and is meant only to keep the pin in place after installation.