Push bar doors are commonly found in public buildings and can be seen as exit doors. It is a term used for a horizontal metal bar attached to an outward-opening door that acts as a mechanism for ease of exit. It is sometimes referred to as a “panic bar,” “crash bar,” or “exit device.” While they’re convenient for a quick escape in an emergency, they can also be a security concern if not properly locked. It is crucial to be able to lock these doors for safety and security reasons. In this article, we’ll take you through the steps of how to lock a push bar door in a step-by-step manner.
Step 1: Check the door type and the door’s latch
Before attempting to lock the door, it’s important to ensure that it is the right type of door. Push bar doors are typically emergency exit doors, which are designed to open easily in case of an emergency. Make sure that you are locking the right type of the door before proceeding.
Check if the door latch is in the locked position. If the latch is in the unlocked position, you won’t be able to lock the door. Push the latch back into the locked position.
Step 2: Identify and locate the lock
Push bar doors have a locking mechanism located either on the outside or inside of the door. Most of the time it’s located on the inside of the door near the push bar. Identify the lock mechanism by checking the door’s frame, handle, and lock area. Do the same thing in case the door has a mechanism on the outside as well.
You May Like: Steps on How to Remove Door Hinge Pin
Step 3: Insert the key
Make sure you have the right key and insert it into the lock mechanism.
Step 4: Turn the key
Turn the key to the right to lock the door. If the key won’t turn, try wiggling it gently. If it still won’t turn, try lubricating the lock with a silicone spray. Make sure to do it gently so the key doesn’t brake.
To confirm that the lock is secure, gently pull on the door to make sure it doesn’t open. If the door opens, check the lock mechanism and repeat steps 3 to 4 until it is secure.
Step 5: Test the door
Once the door is locked, test it by pushing the push bar. The door should not open. If the door opens, double-check that the latch is in the locked position and that the key is turned fully to the right.
Step 6: Repeat the process on the other side of the door (if applicable)
If the lock mechanism is located on the outside of the door, repeat the steps on the other side of the door to ensure that the door is fully locked.
Overall, push bar lock is something we often see in different facilities such as commercial buildings or health facilities. It’s a great way to ensure the safety of your property. By following these simple steps you’ll be able to use and lock it properly in a simple and straightforward process.
Also Read: Do smart door locks need to be connected to the Internet?