When it comes to securing your valuables, you want to make sure that you have a system that is reliable and secure. A cam lock is one option that you may want to consider. Last post, we talked about how to use Cam Lock. Here is a look at how does cam lock work and why they may be the best option for you.
What Is a Cam Lock?
A cam lock is a type of locking mechanism used to secure doors, drawers, and other objects. Cam locks are often used in office furniture, cabinets, and lockers. Sometimes called cam locks, these fasteners are widely used in woodworking and metalworking. Their simple design allows them to be installed quickly and easily, without the need for tools or fasteners. Cam locks work by inserting a pin into a hole in the body of the lock, which engages with a cam on the inside of the lock. When the pin is turned, the cam rotates, locking the two pieces together.
Are Cam Locks Good?
Cam locks are an excellent choice for locking up your valuables. They offer a high level of security and can be difficult to pick. However, they are not impenetrable and can be defeated with the right tools and knowledge. Make sure you understand how cam locks work before relying on them to keep your belongings safe.
How Does Cam Lock Work
A cam lock is a locking device that uses a cam to mechanically block or allow access to a door, drawer, or lid. The cam part of the lock is a rotating disk with a hole in the middle that lines up with a matching hole in the strike plate when the lock is in the open position. When the cam is turned to the closed position, the hole in the cam lines up with a slot in the strike plate, effectively blocking access.
Cam locks are often used in office furniture, such as filing cabinets and desk drawers, as well as on doors and windows. They are relatively simple to install and can be opened with a key or a pin. Cam locks are also available in a variety of different sizes and finish to match the look of your furniture or door.
How Do You Remove a Cam Lock?
There are a few ways to remove a cam lock, depending on the type of lock you have. The following are steps for removing a standard cam lock:
1. Insert a small, flat-head screwdriver or butter knife into the space between the locking tab and the body of the lock.
2. Apply pressure to the tool, prying the locking tab up and away from the body of the lock.
3. Once the locking tab is released, the cam lock can be removed from the door or drawer.
If you have a more difficult cam lock, such as one with a locking mechanism that must be released before the tab can be pried up, you may need to use a pair of needle-nose pliers or a lock-picking tool to release the mechanism. Once the mechanism is released, the cam lock can be removed in the same manner as a standard lock.
